Suspect Lead-Containing Materials Checklist
Lead isn’t only in old paint. It can turn up in coatings, glazes, solder, metals, plumbing parts and specialty building products. This list covers the usual lead-based paint inspection targets plus materials that may need testing before demolition, for worker safety or for waste disposal. Tap a section to see every material in it.
Before you start
- A material on this list is not confirmed lead. Testing is the only way to know.
- Many homes built before 1978 have lead-based paint, and the older the home, the more likely it is (EPA).
- Plumbing depends on build year: lead service lines are more likely in homes built before 1986, and brass faucets and fixtures and lead solder are other common sources (EPA).
- Don’t sand, scrape, grind or burn painted surfaces before testing. Those methods can spread lead dust.
Painted walls, ceilings and interiors
painted drywall, plaster and ceilings; painted concrete, masonry, brick and stucco walls; painted wood paneling; painted acoustic panels and ceiling tiles; painted columns and exposed beams; painted stairwells and partitions; painted trim, built-in shelving, cabinets, closets and doors.
Doors, windows and trim
painted wood and metal doors and frames; painted window frames, sashes, sills and trim; door casings; baseboards; crown molding; chair rails; shutters; garage doors; handrails, stair railings, treads, risers and banisters; decorative millwork; exterior trim.
Exterior surfaces
painted stucco; painted wood and metal siding; painted concrete, brick and masonry; fascia, soffits and eaves; fences and gates; decks, balconies and porch railings; exterior stairways; pergolas and columns; retaining walls; awnings and canopies.
Structural steel and metal
painted steel beams, columns and joists; painted metal decking and staircases; steel railings and fencing; steel doors and metal window frames; support brackets; industrial platforms; tanks; metal pipes; equipment housings; anti-corrosion primers, including red lead primer; industrial and specialty metal coatings.
Plumbing and piping
lead water supply pipes and service lines; lead solder and pipe joints; lead caulking in cast-iron pipe joints; brass and bronze fittings and components; older fixtures, valves and faucets; pipe connectors and plumbing alloys; lead-lined piping; pipe coatings.
Roofing, flashing and waterproofing
lead sheet roofing; lead roof, chimney and vent flashing; lead-coated metal roofing; roof solder; gutters and downspouts; roof repair materials; painted roofing components and roof equipment.
Ceramic tile, porcelain and glazed materials
glazed ceramic wall, floor, bathroom and backsplash tiles; decorative glazed tiles; glazed porcelain fixtures, sinks and bathtubs; glazed architectural ceramics and masonry; glazed terracotta; ceramic pigments. Not all ceramic tile is suspect. Lead in a ceramic glaze isn’t classified as lead-based paint under federal housing rules, but breaking, grinding or drilling glazed tile can still release lead dust and expose people to lead. Test before the tile is disturbed, and match the testing to how it will be disturbed.
Glass and windows
leaded stained-glass windows and the lead strips (came) that hold them; decorative glass; lead crystal architectural parts; specialty glazing; window solder; glazing compounds; lead-lined specialty windows; radiation-shielding glass.
Flooring and floor coatings
painted wood and concrete floors; painted stair treads; painted industrial flooring; specialty floor paints; traffic-marking coatings; painted curbs and parking garage surfaces; older lead-pigmented floor finishes; specialty vinyl or plastic flooring with lead additives.
Electrical and mechanical
lead-sheathed cables and cable coverings; electrical solder, wire connections and alloys; lead-acid batteries; painted HVAC equipment and ductwork; painted mechanical equipment, boilers and furnaces; painted electrical cabinets, transformers and enclosures; vibration-dampening parts.
Masonry, concrete and specialty products
masonry and concrete coatings; architectural pigments; lead-stabilized plastic building products. Some specialty mortars, waterproofing products, sealants, adhesives and rubber parts are only worth testing when product records or the building’s history give a reason to suspect lead.
Specialty and industrial materials
lead-lined drywall, doors and cabinets; radiation-shielding panels and bricks; acoustic barriers and vibration-dampening sheets; counterweights; elevator parts; specialty alloys; laboratory equipment; industrial tanks and chemical-resistant linings; manufacturing equipment; metal fillers.
Dust, soil and debris
These aren’t products made with lead, but they can hold it. Dust on floors and windowsills, inside window troughs, wall cavities and HVAC ducts, and above suspended ceilings; dust around industrial equipment; soil next to older painted buildings or under peeling exterior paint; soil near past industrial sites; demolition debris with lead-painted materials; sandblasted or scraped surfaces; areas from past lead abatement.
Need to know before you start work?
We test paint, dust, soil and building materials so you can plan the project, protect workers and handle waste the right way.
Call San Diego 858.433.3290 · Orange County 714.515.5095 · Bay Area 415.857.9443